|Size||1/2 INCH TO 50 INCH|
|Brand||Carbon Steel A105 Flanges|
|Material Standard||Carbon Steel A105 Flanges|
|Usage/Application||- Petrochemical Industry - Oil and Gas Industry - Chemical Industry - Power Plant Industry - Energy|
|Type||Carbon Steel A105 Flanges|
|Country of Origin||Made in India|
Carbon Steel A105 Spectacle Blind Flanges, ANSI B16.5 Carbon Steel A105 Ring Type Joint Flanges, Carbon Steel A105 Nippo Flanges, Carbon Steel A105 Industrial Flanges Stockholder, ASME SA105 Carbon Steel Lap Joint Flange, Carbon Steel A105 Screwed Flanges Stockist, Carbon Steel A105 Forged Flanges Manufacturer.
HEUBACH INTERNATIONAL is a known manufacturer of ASTM A105 CS Flanges, where the high strength can pose problems. ASTM A105 Carbon Steel Slip On Flanges is reserved for those steels that contain a modest amount of alloying elements and that usually depend on thermal treatment to develop specific properties. Even when the ductility is adequate, higher forces in ASME SA 105 Carbon Steel Threaded Flanges are required to form the material, for example in tube bending. The heat treatment in ASTM A105 Carbon Steel Socket Weld Flanges should be followed by subsequent rapid cooling in water or air, where this treatment applies for both solution annealing and stress relieving. In special cases, ASME SA 105 Carbon Steel Weld Neck Flanges can be done at 500 Degree C – 550 Degree C. HEUBACH INTERNATIONAL is one of the stockiest and trader for high quality ASTM A105 Carbon Steel Blind Flanges, where there is one exception to the normal rule of poorer machinability. ASME SA 105 Carbon Steel Lap Joint Flanges are generally more demanding to machine than conventional austenitic stainless steel, due to the higher hardness. However, ASTM A105 Carbon Steel Ring Joint Type Flanges has shown excellent machining properties. ASME SA 105 Carbon Steel Spectacle Blind Flanges is lean steel that generally offers a similar corrosion resistance, but has advantages in oxidizing media such as nitric acid solutions due to its low molybdenum content.
ASTM A105 / ASME SA105, A105N
1/2″ (15 NB) to 48″ (1200NB)
Flange Face Type
Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Class / Pressure
150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
We at HEUBACH INTERNATIONAL provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Carbon Steel A105 Flanges Application Industries