|Shape||ROUND, SQUARE, HEXAGON|
|Usage/Application||- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty|
|Grade||Incoloy 825 Round Bar|
|Material||Incoloy 825 Round Bar|
|Material Grade||Incoloy 825 Round Bar|
|Size||2 MM TO 600 MM|
|Single Piece Length||3 MTRS TO 6 MTRS|
HEUBACH INTERNATIONAL offers an extensive collection of Incoloy 825 Round Bars, which is extremely resistant to corrosion, even in acidic environment. Our Incoloy 825 Square Bars is also used in Chemical process equipment, Tank trucks, Propeller shafts, Electrostatic precipitator electrodes, Hot vessels for food, water and sea – water. The fabrication of these Incoloy 825 Flat Bars is typical of nickel – base alloys, with material being readily formable and weldable by a variety of techniques. The titanium addition serves, by means of an appropriate heat treatment, to stabilize our Incoloy 825 Threaded Bars against sensitization to inter – granular corrosion. These Incoloy 825 Hollow Bars is characterized by good toughness, even under continuous operation, at both room and elevated temperatures, up to approximately 550 Degree C. Our Incoloy 825 Hexagonal Bars is a nickel – base alloy generally similar to Alloy 20 in aqueous corrosion, which requires no post – weld heat treatment. These Incoloy 825 Triangular Bars has good stress corrosion cracking resistance performance, along with good resistance for pitting and crevice corrosion performance. Our Incoloy 825 Bars is a nickel – iron – base alloy generally similar to Alloy 20.
ASTM B425 / ASTM SB425
EN, DIN, JIS, ASTM, BS, ASME, AISI
5 mm To 500 mm
0.1 mm to 100 mm
100 mm To 3000 mm Long & Above
Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.
We at HEUBACH INTERNATIONAL provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
We at HEUBACH INTERNATIONAL ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest